Bild
Titelbild HUBTEX MU-OP
Up to
5t
load capacity
Up to
12.50m
lift height
Adaptable
to all
applications

Electric multidirectional order picking platform
MU-OP | MU-SO
by  HUBTEX
 

Our multidirectional order picking sideloader in the 1-man version (MU-OP) and the 2-man version (MU-SO) can be adapted to your individual requirements. The models are specially designed for picking profiles and pipes in narrow aisles. At the same time, these trucks can be used as conventional electric multidirectional sideloaders for the stacking of complete packs. 

Order picking directly from the cab

The MU-OP model is designed for one operator for the order picking of lightweight loads, such as aluminum, plastic or steel profiles. Its narrow rear frame, the optimized design of the lift mast and the central standup cab in front of the mast make the vehicle very narrow and therefore ideal for use in guided aisles. The central configuration of the standup cab in front of the lift mast gives the driver a clear view into the rack compartment, enabling him to pick light loads directly from the rack. Despite the slender design of the cab, all functions of the multidirectional sideloader are included, making the truck a fully-fledged electric multidirectional sideloader. This means that this vehicle can transport complete packs and bundles or provide manual assistance for order picking processes.

Available with two cabs for long loads

The MU-SO model with two operators is recommended for the order picking of medium to heavy loads. In this model, the cabs are arranged next to the lift mast. This allows for easy order picking by two people, particularly in the case of longer loads.
When stacking complete packs, the truck is controlled by one driver. Optionally, both cabs can be equipped with all operating controls. However, as both cabs are usually only used when picking long loads, one complete control station is usually sufficient. The second cab is equipped with reduced equipment options but complete safety functions. 

Furthermore, the MU-OP and MU-SO series are equipped with all proven HUBTEX standards, such as two-part chassis frames, robust lift masts, ergonomic workstations, three-phase AC technology and HUBTEX information terminals with color graphic displays. 

Features

Frame and chassis
Our well-known articulated frame on the electric multidirectional sideloaders

The best-selling variants of these profile order pickers use the familiar articulated frames of our electric multidirectional sideloaders. Since man-up vehicles are usually used in areas with good floor and ground conditions, the compact PU tires are standard. If a vehicle is required for very narrow aisle widths, HUBTEX offers a variant of the MU-OP with a rigid frame and the narrowest truck width. 
The 2-man version of the electric multidirectional order picker always uses the two-part articulated frame.
 

Cab
The MU-OP model from HUBTEX with raised standup cab
The MU 50 from HUBTEX, in the two-cab version

For the 1-man version the standup cab is located centrally in front of the mast. Operation is via joystick and steering wheel. Maximum safety for the driver is achieved by sophisticated 2-handed operation. A good view of the load and the option of manual order picking are the two main advantages.
In the 2-man version, the two standup cabs are mounted on both sides of the mast and travel upwards with it and the load. Operation is via joystick and steering wheel, usually from only one cab.  

Lift masts and fork carriages
The MU-OP electric multidirectional sideloader from HUBTEX

Stable and strong lift masts with internal, protected hydraulics manufactured in-house and high residual load capacity ensure minimal oscillation of the mast. The fork carriage is optionally available in a cranked version for more mobility during order picking or, alternatively, as a continuous profile with fork adjustment.

Maximum flexibility
The MU-OP multidirectional order picking sideloader from HUBTEX handling aluminum
The MU 25 with a raised 1-man cab

The MU series of electric multidirectional order pickers offers users maximum flexibility. The vehicles can be used as conventional multidirectional sideloaders or, if required, as order picking vehicles in no time at all.

We know the best solution.

We know that the handling of long goods presents users with special challenges. Arrange a non-binding consultation appointment with our specialists to find the best possible solution for your application.

Interior view of a standup cab in the electric multidirectional order picker

Optimum visibility and the possibility of picking light loads directly from the rack are two essential advantages of the standup cab, which in the 1-man version is located centrally in front of the mast.

Even the top rack level can be reached by the height-adjustable cab

The HUBTEX Man-up guarantees optimum visibility of the loads to be picked.  

The MU-SO two cab order picker at the entry to a narrow rack aisle

The cabs on our MU-SO model are arranged next to the lift mast. This allows an easy order picking operation by two persons, in particular in case of longer loads.

The MU-OP runs optimally in the rack aisles on rack guide rollers

When space is very restricted, our man-up stacker scores with its compact design and optional track guidance. 

The MU-OP 25 equipped with the 1-man standup cab

Despite the slender design of the cab, all functions of the multidirectional sideloader are included, making the truck a fully-fledged electric multidirectional sideloader.

The MU-OP offers the option to be able to pick directly from the standup cab

The central configuration of the standup cab in front of the lift mast enables the driver to pick light loads directly from the rack.

The operator terminal of a standup cab in an electric multidirectional order picker

The operator terminal of the standup cab impresses with its clarity and is therefore very easy to handle. 

TECHNICAL DATA

Series MU-OP (2121)

Load capacity 1.5 to 2.0 t

Load bed width 600 to 1600 mm

Lift height up to 7500 mm

Load bed opening 1340 mm

Frame length 2950 mm

PU- Tire equipment (optional)

Battery voltage 48 V

SU cab (optional)

Series MU-OP (2140)

Load capacity 3.0 to 3.5 t

Load bed width 600 - 1800 mm

Lift height up to 8500 mm

Load bed opening 1340 mm

Frame length 3640 mm

PU- Tire equipment (optional)

Battery voltage 80 V

SU cab (optional)

Series MU-SO (2140)

Load capacity 3.0 to 5.5 t

Load bed width 600 - 1800 mm

Lift height up to 10000 mm

Load bed opening 1340 mm

Frame length 3640 mm

PU- Tire equipment (optional)

Battery voltage 80 V

2x SU cab (optional)

Series MU-SO (2131)

Load capacity 5.5 to 7.0 t

Load bed width 600 - 1800 mm

Lift height up to 10000 mm

Load bed opening 1630 / 1960 mm

Frame length 3170 / 3500 mm

PU- Tire equipment (optional)

Battery voltage 80 V

2x SU cab (optional)